Saudi Arabia Engineering Services
Saudi retrofit enquiries may include Delta or Siemens controller replacement, HMI upgrades, drive changes or legacy-system modernization. Share current and proposed model numbers, backups, drawings and outage constraints before selecting hardware or scope.
Compare existing and proposed I/O, signal ranges, network interfaces, scan behavior, HMI tags and drive commands. Plan tests around operating procedures and the customer-approved outage plan.
The catalogue currently lists the Delta DVP28SV11R PLC and Delta DOP-107CV HMI. Submit the exact Siemens or alternate Delta part number for checking; provide the existing project details as a separate retrofit scope.
A retrofit changes selected control components while preserving required machine behavior. Delta and Siemens products belong to different controller and HMI families; compatibility depends on exact hardware, I/O, software, communications, wiring and operating sequence. Product price and programming/commissioning scope should be requested separately or itemized together.
A Delta DVP or Siemens S7 replacement must be assessed against installed I/O, memory, signal types, communication, timing, software and machine logic. Brand-level similarity does not establish direct interchangeability.
The quote can cover catalogue hardware, PLC/HMI changes and related engineering, but each deliverable, quantity, availability and implementation responsibility needs confirmation. No Saudi stock or on-site delivery is promised.
Explore the control systems that may be relevant to this scope.
These active catalog products are related by their existing category. Confirm model compatibility, condition, availability and delivery for your destination before ordering.
VFD & Drives
Brand: Delta · Model: C2000
Delta C2000+ VFD1850C43A-00, 185 kW / 250 HP, 460 V three-phase industrial AC drive for advanced motor speed and torque control.
HMI
Brand: Siemens · Model: KTP700
Siemens KTP700 Basic HMI, 6AV2123-2GB03-0AX0, with 7-inch TFT touchscreen, 800×480 resolution, 65,536 colors, PROFINET communication and 24VDC supply.
Control Panel Components
Brand: MECHATRONICS AUTOMATION · Model: MAES-0002
Automatic relay and contactor-based control panel for 10 HP baling machines, providing automatic cycle control, motor protection, limit-switch sequencing, fault indication and operator controls without a PLC.
Control Panel Components
Brand: MECHATRONICS AUTOMATION · Model: MAES-001
Fully automatic AGSS control panel for automatic operation and monitoring of two-stage vacuum/scavenging systems, featuring HMI monitoring, automatic pump control, pump selection, alarms, protection and emergency stop.
PLC
Brand: SIEMENS · Model: 6ES7214-1AG40-0XB0
Siemens S7-1200 CPU 1214C DC/DC/DC PLC with 14 digital inputs, 10 digital transistor outputs and 2 analog inputs. 24 V DC supply, 150 KB program/data memory and PROFINET communication.
Industrial Communication
Brand: Mechatronics Automation · Model: MAES-COMM-3
RS232 serial communication cable for compatible PLCs and HMIs, suitable for programming, configuration, commissioning, diagnostics and industrial automation communication.
VFD & Drives
Brand: DELTA · Model: VFD002EL21A
Delta VFD002EL21A 0.2kW (0.25HP) VFD with 200–240V single-phase input, 3-phase output, 1.6A rated output current, V/F control, RS-485 Modbus, built-in braking transistor and 0.1–600Hz frequency range.
HMI
Brand: DELTA · Model: DOP107CV
Delta DOP-107CV 7-inch industrial touchscreen HMI with 800×480 resolution, 65,536-color TFT display, 256 MB RAM/ROM, RS-232/RS-485/RS-422 communication, USB Host/Client, and 24 VDC power supply.
Discuss the equipment, existing controls and project requirements with our engineering team.
Request service quote →Discuss the equipment, existing controls and project requirements with our engineering team.
Request service quote →Discuss the equipment, existing controls and project requirements with our engineering team.
Request service quote →Discuss the equipment, existing controls and project requirements with our engineering team.
Request service quote →Discuss the equipment, existing controls and project requirements with our engineering team.
Request service quote →Explore the relevant engineering or catalogue enquiry area. Each request is reviewed against the equipment, project scope and delivery requirements.
Not without a compatibility and program review. Compare exact I/O, electrical interfaces, timing, software, communications, panel fit and machine behavior.
Yes. Include existing and proposed order codes, quantity, application and any acceptable alternatives. Quote and availability depend on the exact models.
Potentially, if the PLC interface, tags, communications, engineering files and operator needs support it. Review both exact models before selecting a panel.
Share the equipment details, current controls and process sequence for a scope review.