Position and synchronization
Positioning and synchronization require compatible controller, drive, feedback and mechanics. The design should be based on the machine's actual motion requirements.
Industrial Automation Products · Engineering Services · Quote Support
Technology
Industrial Motion Control
Motion control coordinates speed, position and synchronization for machine axes using compatible drives, feedback and controller capabilities. Automation scope depends on the equipment, operating sequence, existing controls and process requirements. Share the machine details and desired outcome to define a suitable control approach.
Application overview
Motion control coordinates speed, position and synchronization for machine axes using compatible drives, feedback and controller capabilities.
Typical requirements to define
- Axis count and machine mechanics
- Motion profile and synchronization needs
- Feedback devices and homing method
- Safe motion and fault recovery requirements
Example process sequence
- Describe required axis behavior
- Confirm controller and drive capabilities
- Define motion states, references and feedback
- Review limit and fault handling
- Verify coordinated behavior on the machine
Related automation technologies
Explore the control systems that may be relevant to this scope.
Products from the catalog
These active catalog products are related by their existing category. Confirm model compatibility and availability for your application.
PLC
Siemens S7-1200 CPU 1214C DC/DC/DC PLC – 14DI/10DO/2AI, 6ES7214-1AG40-0XB0
Siemens S7-1200 CPU 1214C DC/DC/DC PLC with 14 digital inputs, 10 digital transistor outputs and 2 analog inputs. 24 V DC supply, 150 KB program/data memory and PROFINET communication.
VFD & Drives
Delta VFD EL SERIES 0.025 TO 5 HP | 0.2KW TO 3.7KW
Delta VFD002EL21A 0.2kW (0.25HP) VFD with 200–240V single-phase input, 3-phase output, 1.6A rated output current, V/F control, RS-485 Modbus, built-in braking transistor and 0.1–600Hz frequency range.
PLC
Delta DVP28SV11T2 PLC – DVP-SV2 Series, 16 Digital Inputs, 12 Transistor Outputs, 24V DC
Delta DVP28SV11T2 DVP-SV2 Series high-performance slim PLC with 16 digital inputs and 12 NPN transistor outputs. Featuring high-speed processing, high-speed counters and pulse outputs, it is suitable for machine automation, motion control, packaging, printing, conveyor and industrial control applications
PLC
Delta DVP12SA2 PLC – DVP-SA2 Advanced Slim PLC, 8DI/4DO, 24VDC, RS-232/RS-485
Delta DVP12SA2 DVP-SA2 Advanced Slim PLC with 8 digital inputs, 4 digital outputs, 24VDC supply, 16K steps and RS-232/RS-485 Modbus communication.
PLC
Delta DVP60ES200R PLC – DVP-ES2, 36DI/24 Relay Output, 16K Steps
Delta DVP60ES200R DVP-ES2 PLC with 36 digital inputs, 24 relay outputs, 100–240VAC power supply and 16K-step program capacity for industrial automation.
PLC
Delta DTC1000 Temperature Controller – 24VDC, PID/ON-OFF Control, RS-485 Modbus
Delta DTC1000 modular temperature controller with 24VDC supply, PID/ON-OFF control, multiple sensor inputs and RS-485 Modbus communication.
PLC
Delta DVP14SS211R PLC – DVP-SS2 Slim PLC, 8DI/6 Relay Outputs, 24VDC, RS-232/RS-485
Delta DVP14SS211R DVP-SS2 Slim PLC with 8 digital inputs, 6 relay outputs, 24VDC supply, RS-232/RS-485 communication and Modbus support.
Sensors
Pressure Transmitter -1 to 1 Bar, 4–20 mA, 24 VDC – Industrial Pressure Sensor
Industrial pressure transmitter for -1 to +1 bar pressure measurement with 4–20 mA output and 24 VDC supply. Suitable for PLC, HMI, PID and industrial automation applications.
Related engineering services
PLC programming
Discuss the equipment, existing controls and project requirements with our engineering team.
Request service quote →VFD programming
Discuss the equipment, existing controls and project requirements with our engineering team.
Request service quote →Machine automation
Discuss the equipment, existing controls and project requirements with our engineering team.
Request service quote →Related applications and topics
Frequently asked questions
What information is useful for a industrial motion control enquiry?
Describe the machine or process, current controls, operating sequence, required modes, available drawings and the changes you want to make. Include known controller and drive models where possible.
Can existing equipment be considered?
Yes. Include the installed controller, HMI, drives, sensors and any drawings or fault details so the existing arrangement can be reviewed before defining scope.
Discuss your automation requirements
Share the equipment details, current controls and process sequence for a scope review.